Parametros de herramientas de

About: Parametros de herramientas de

This application will calculate some basic parameters for programming numerically controlled lathes such as cutting speed, optimal working diameter and revolutions per minute have to be around.

A more also it gives you an approximation of the roughness Ra have the piece in question introducing him advance in the form of mm / rev, and the tool radius.

You may be calculated any of the three data which introduced two of them wants; for cutting speed and surface roughness Ra.




Functioning:
- On the initial screen are six rectangles, each one with its specification and separated into two blocks. To enter a value, you must click on the box one of these.

- When the program has sufficient data to solve the parameters, and return automatically modify the values ​​you entered in white and the other green, indicating that data are resolved.

- Then you can modify any value you previously entered the (white data). Each change is stored in the device memory.

At the bottom of the screen, you will find a menu with three buttons:
· Home Screen which will return to the home screen and erase all previously created parameters.

· Save: You can save the triangles created in .doc, .txt, or odt. These text files are saved in the "cutting parameters / data" folder.

· Add: return to the home screen but without the above parameters are deleted and when you select Save, shall all these.